Sorry I did not see this sooner. I was not a member of the group until now.
The FTdx10 has a number of idiosyncrasies associated with SSB. The major problem is adjusting the mic gain, processing gain, and the AMC (automatic microphone control). These interact and just increasing the mic gain will not increase power depending on the other settings. If you use the processor (which I do), your power meter will more closely match the peak power, as expected. As I recall, the ALC meter reading is used to adjust the processor level. It is not helpful for mic gain because of the AMC. There are some detailed discussions on how to adjust the three controls. The AMC is especially vexing, because it seems backwards.
When properly adjusted, the transmitted audio is clean sounding and has good punch, and the power peaks are not stuck at 50W. A spectrum analyzer can be helpful. The manual is not.
There was a problem reporting this post.
Please confirm you want to block this member.
You will no longer be able to:
Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.